Question 1

Can you integrate seating into the cabinetry?

Accepted Answer

Yes. We build integrated benches for mudrooms or breakfast nooks, often featuring flip-top storage or deep drawers below the seat for transition storage.

Question 2

What is cubby storage?

Accepted Answer

Open-fronted square or rectangular compartments used in mudrooms for organizing shoes, baskets, or mail at an accessible height.

Question 3

How do you handle open coat storage?

Accepted Answer

We install sturdy, decorative hardware hooks above built-in seating. These are typically anchored into a reinforced "beaded backboard" or solid wood rail to support the weight of heavy winter gear.

Question 4

What are 'Drop Zones' and 'Landing Areas'?

Accepted Answer

A Drop Zone is a specialized mudroom or entry area for keys, mail, and bags. A Landing Area is the countertop space next to a range, sink, or refrigerator required for safe food prep and unloading.

Question 5

What is Shaker style cabinetry?

Accepted Answer

A timeless design characterized by a five-piece door with a recessed center panel and minimal ornamentation. It prioritizes utility and clean lines, making it the most versatile choice for both traditional and modern homes.

Question 6

What is a 'Micro Shaker' door?

Accepted Answer

A contemporary take on the classic Shaker style featuring ultra-slim rails (typically 1/2" to 3/4" wide) for a sleek, modern aesthetic.

Question 7

What is Cope and Stick joinery?

Accepted Answer

The standard for Shaker and raised panel doors. The "stick" is the decorative profile routed along the inside edge of the frame, and the "cope" is the inverse cut on the ends of the rails that allows them to interlock perfectly.

Question 8

What is a beaded backboard?

Accepted Answer

A decorative vertical paneling used as the back of a mudroom bench or locker area to provide a classic, finished look.

Question 9

Can you match the wall paneling to the cabinets?

Accepted Answer

Yes. We create coordinated wainscoting or "beadboard" panels that install directly onto the walls or island backs to provide a continuous, high-end millwork wrap throughout the room.

Question 10

What is a Beaded Face Frame?

Accepted Answer

A luxury inset cabinetry detail where a small 1/4" rounded "bead" is routed into the inner edge of the face frame. This creates a shadow line that frames every door and drawer for a high-end furniture look.

Question 11

What room is this cabinetry designed for?

Accepted Answer

While specific designs may be shown for mudrooms or kitchens, our styles are versatile and can be adapted for laundry rooms, bathrooms, or bars.

Question 12

What is a 'Butler's Pantry' vs. a 'Walk-in Pantry'?

Accepted Answer

A Butler's Pantry is a staging area between the kitchen and dining room, often featuring a small sink and wine storage. A Walk-in Pantry is a dedicated room or large closet specifically for bulk dry-good storage.

Question 13

How durable is a custom painted finish?

Accepted Answer

Our finishes utilize a catalyzed post-conversion varnish. Unlike standard household paint, this chemical-cure coating is resistant to grease, household cleaners, and the high-humidity environment of a kitchen.

Question 14

What is the difference in material for paint vs. stain?

Accepted Answer

Stain-grade uses "select" woods with consistent grain and color. Paint-grade uses "Refined MDF" or "tight-grain" woods like Poplar or Birch to ensure no grain texture shows through the finish.

Question 15

What are UV Cured finishes?

Accepted Answer

Used primarily on cabinet interiors, these coatings are cured instantly using ultraviolet light. This creates an incredibly hard, scratch-resistant surface that is chemically inert and easy to wipe clean.

Question 16

What is the difference between paint and glaze?

Accepted Answer

Paint is an opaque solid color. A glaze is a semi-transparent layer applied over the base paint or stain; it is wiped off but remains in the profiles and corners to highlight the door's architectural details.

Question 17

Should I replace upper cabinets with open shelves?

Accepted Answer

Open shelving makes a kitchen feel larger and allows for decor display, but it requires constant organization and exposes items to dust and grease. A popular compromise is using shelves only near the window or range.

Question 18

Do you offer live-edge shelving?

Accepted Answer

Yes. We source locally milled Alberta slabs (Maple, Elm, or Poplar). These are kiln-dried and flattened, then mounted with heavy-duty hidden brackets to maintain the natural bark-edge look.

Question 19

How do you light up glass shelves?

Accepted Answer

We use "back-lit" LED panels or "edge-lit" glass clips. Alternatively, we can route a recessed LED channel into the cabinet gables to provide a continuous wash of light across all shelf levels.

Question 20

What are the benefits of full-height cabinetry?

Accepted Answer

Floor-to-ceiling cabinetry maximizes vertical storage, eliminates the need for dust-collecting soffits, and creates a clean, architectural look.

Question 21

What crown moulding profiles and architectural details are available?

Accepted Answer

We offer stacked crown moulding, dentil profiles, and fluted pilasters. These can be integrated with light valances and plinth blocks to create a continuous, floor-to-ceiling architectural statement.

Question 22

How high should wall cabinets be mounted?

Accepted Answer

Standard mounting height is 18" above the countertop (54" from the floor). For taller homeowners or those with large countertop appliances (e.g., professional mixers), 20" to 22" of clearance is often specified.

Question 23

What is a 'Tuxedo' finish layout?

Accepted Answer

A design where the upper cabinets and lower cabinets are finished in contrasting colors—typically white or light wood on top and a dark, anchoring color (like navy or charcoal) on the bottom.

Question 24

What is 'Color Drenching' in kitchen design?

Accepted Answer

A bold trend where cabinets, walls, trim, and even the ceiling are finished in the exact same hue (usually a deep navy or forest green) to create a cohesive, immersive environment.

Question 25

What is the functional benefit of Reeded Glass?

Accepted Answer

Reeded (fluted) glass diffuses light and obscures the contents of the cabinet. This allows for a "light and airy" look without requiring the interior of the cabinet to be perfectly organized at all times.

Question 26

What is a mullion door?

Accepted Answer

A cabinet door frame with horizontal and vertical wood dividers (grids) that hold individual panes of glass. This replicates the look of traditional divided-lite windows.

Question 27

How is glass integrated into custom doors?

Accepted Answer

We use 1/8" or 1/4" tempered safety glass. The door frame is "rabbeted" on the back to accept the glass, which is then secured with removable wood stops or silicone glazing beads for easy replacement if needed.

Question 28

Why is my beverage fridge sticking out?

Accepted Answer

Many "beverage centers" are 24-25" deep including the handle. Standard base cabinets are 24". We often specify "extended gables" (26" depth) to ensure the fridge face sits flush with the door fronts.

Question 29

Does an under-counter wine fridge need special venting?

Accepted Answer

Yes. Most under-counter units vent from the front (bottom). The cabinet toe-kick must remain unobstructed, or we must CNC-slot the toe-kick board to ensure the compressor doesn't overheat and fail.

Question 30

What is required for a built-in wine fridge?

Accepted Answer

The cabinetry must be engineered with precise ventilation paths to allow for a flush-mounted installation without overheating the compressor.

Question 31

How do drawers differ from a standard bar fridge?

Accepted Answer

Refrigerated drawers (Perlick/U-Line) require 24" width and a depth of 24". Because they are "heavy-pull" appliances, the cabinet must be bolted to the floor or the countertop to prevent the unit from tipping forward when both drawers are full.

Question 32

Can I choose different hardware or decorative details?

Accepted Answer

Yes. Pulls, knobs, and decorative millwork like corbels and crown moulding can be swapped, simplified, or enhanced to suit your style.

Question 33

What are 'Metal Sided' drawer systems?

Accepted Answer

Systems like Blum Tandembox use steel or aluminum drawer sides with integrated runners. They offer a sleek, industrial look, higher weight capacities (up to 150 lbs), and built-in organization "galleries" for pots and pans.

Question 34

What are Soft-Close hinges and slides?

Accepted Answer

Soft-close mechanisms use hydraulic dampers to prevent doors and drawers from slamming, ensuring quiet operation and reducing wear on the cabinet frame.

Question 35

What functional hardware upgrades are standard for premium builds?

Accepted Answer

All high-end units feature soft-close under-mount slides (e.g., Blumotion), 110-degree concealed hinges, and solid wood dovetail drawer boxes as a baseline for durability and feel.

Question 36

Why is Walnut considered a luxury material?

Accepted Answer

Walnut offers a unique combination of structural stability and a rich, naturally dark chocolate tone. It features a tight grain that polishes to a high sheen, making it the premier choice for modern and mid-century aesthetics.

Question 37

Which wood species is most stable for Alberta's climate?

Accepted Answer

Oak and Hickory are highly durable, but Walnut and Rift-Sawn Oak are the most stable against Alberta’s extreme humidity swings. Maple is beautiful but more prone to "seasonal movement" in dry winters.

Question 38

Do you work with exotic veneers or reclaimed woods?

Accepted Answer

Yes. We source premium Rift-Sawn White Oak, Walnut, Zebrawood, and book-matched veneers, as well as reclaimed timbers for high-character feature pieces.

Question 39

Why choose drawers over standard base doors?

Accepted Answer

Drawers provide superior ergonomics and 100% visibility. We utilize full-extension undermount slides, allowing you to access items at the very back without kneeling or reaching.

Question 40

How do you fit more silverware in one drawer?

Accepted Answer

We install a "Double-Decker" drawer-in-a-drawer. The top tray slides back to reveal a second layer of storage below, doubling the capacity for cutlery and small gadgets.

Question 41

What is Transitional cabinetry design?

Accepted Answer

A blend of traditional and contemporary styles. It often features Shaker-style doors with modern hardware and a neutral color palette, creating a balanced look that is neither too ornate nor too clinical.

Question 42

How do you design a high-end cocktail zone?

Accepted Answer

Include an integrated "ice well" or dedicated clear-ice maker, a small "bar sink," and 12" deep "bottle stepped" shelving for spirits to mimic a professional lounge environment.

Question 43

What is required for an integrated home bar?

Accepted Answer

A 24" wine fridge, stemware racks (wood or metal), and a "mirrored back" or stone backsplash. We recommend 15" deep upper cabinets to accommodate larger red wine glasses.

Question 44

How can I hide a home bar?

Accepted Answer

We use pocket doors that slide back into the cabinet carcass, revealing a fully equipped bar setup only when needed.

Question 45

How are wine glasses stored in custom bars?

Accepted Answer

We install under-cabinet or internal rails designed for hanging wine and martini glasses securely by their stems.

Question 46

Why use mirrors in a bar area?

Accepted Answer

Using mirror glass as a backsplash increases ambient light and creates a sense of depth, making a beverage station feel more expansive.

Question 47

How do you store tall bottles?

Accepted Answer

We use a reinforced base pull-out with high chrome rails. This prevents heavy glass bottles from tipping when the drawer is moved and can be fitted with a stainless steel "ice bucket" insert.

Question 48

What is a luxury decanting shelf?

Accepted Answer

A pull-out shelf lined with premium leather or felt, specifically designed for decanting spirits or displaying luxury glassware.

Question 49

Can this be built in a different finish or colour?

Accepted Answer

Yes. Every piece is custom built to order. You can choose any paint colour, stain, or two-tone finish, including custom colour-matching.

Question 50

What are specialty finishes?

Accepted Answer

These include hand-applied techniques like "distressing," "rub-through," or "sand-through" edges that mimic the wear of antique furniture. We also offer "metallic" lacquers that provide a shimmering, automotive-grade aesthetic.

Question 51

Can wood be finished to look like real metal?

Accepted Answer

Yes. We use "Liquid Metal" coatings containing real brass or zinc particles. Once sprayed and polished, the cabinetry has the weight, cold feel, and patina of solid metal without the immense cost or weight.

Question 52

What is a 'Chef’s Pantry' shelf system?

Accepted Answer

A heavy-duty vertical pull-out that features 5-7 adjustable chrome or wood baskets. The entire tower slides out on 200lb-rated runners, giving you access to both sides of the shelving at once.

Question 53

What is a revolving pantry?

Accepted Answer

A specialized tall cabinet where the entire interior shelving unit pivots 180 degrees. This brings the contents of the back of the pantry directly to the front for maximum accessibility.

Question 54

How deep should pantry shelves be?

Accepted Answer

For reach-in pantries, 12" to 14" is ideal to prevent items from getting lost in the back. For walk-in pantries, 16" to 18" can be used for bulk items, but u-shaped 12" shelving provides the best visibility.

Question 55

What defines a 'Chef Pantry' cabinet?

Accepted Answer

A high-density storage unit featuring swing-out hardware and door-mounted shelving to maximize every inch of available space.

Entryway

Features in this project